Truck Lease-Purchase? Leave It Alone!

By: Michael Farrell
Submitted: 2007-01-17 15:16:36
Print this article | For publisher | Social Bookmarking
Rating:
 

More and more, I hear brand new truck drivers contemplating the lease purchase programs many companies are now advocating. It never ceases to amaze me how these companies will target new drivers. Swift Transportation and Prime Trucking are two of the most aggressive lease purchase companies out there, but it seems all of the companies have jumped on the band wagon.

After all, why wouldn't a trucking company want to pass along the costs of fuel, purchasing a truck, truck maintenance, truck insurance, permits and health insurance? Not to mention, they no longer are expected to provide a 401k plan with company match. And they get to charge the driver much higher prices than market value for a truck that won't be worth much at the end of the lease.

I have heard of drivers buying a used, plain-jane Freightliner century or classic through lease purchase programs and paying in the range of $700 per week. That's $2,800 per month. If you talk to owners of big bunks (the large custom sleepers with showers, toilets, and bells and whistles the average truck driver would never think of), they're paying the same per month- and that's with very little down. Keep in mind, there's a huge difference between a brand new big bunk and a late model truck with a factory sleeper.

Here are some things to think about when contemplating a lease purchase agreement:

1. Trucking is unpredictable. If you don't have the cash or credit to buy a truck on your own, what makes you think you will be able to float through the rough times? Accidents, injuries and illnesses happen. And when they do, you're payments won't stop to wait for you. Trucking companies are in the business of making money, not providing charity.

2. You don't own your truck. If you're leasing your truck from a company, THEY own it- which means you can't leave. It means that no matter what they do to you- drop your miles, load around you, lie to you, charge you more and more for "incidentals"- you can't just leave. If you get a loan from the bank, you can change your company. If you get a loan from the company, you can't.

3. You are signing a contract. You need to understand the terms of the agreement. If you get screwed, it's your own fault. You cannot trust what the company rep tells you to your face- if it's not in writing, it just doesn't count. Always, always, always have a lawyer review the contract and explain to you the upside and the downside. If you've already signed, still take it to a lawyer so that you know your options.

4. Others have been there. Talk to owner operators and ask about the lease purchase deals. You will find that a lot of them started out with one and learned about them the hard way. Many of them were unable to complete the lease. Many of them completed the lease only to find they had worked like dogs to buy a truck that now had a million miles and no value. Learn from their mistakes.

5. These companies tend to target new drivers. Why? Because new drivers simply don't know better. If you haven't been in the industry for at least a few years (and spent those years asking a lot of questions of a lot of drivers) you just don't know enough about trucking to make an educated decision.

Trucking is about making your own road. But, as those of us who have been trucking for years all know, sometimes the road you choose turns into treacherous route. Make your choices carefully-they make the difference between a prosperous trucking career and a transportation nightmare.

CoopsAreOpen.com is the only comprehensive online resource for over 1100 truck weigh stations and scales as well as state DOT weight regulations and policies. Knowledge of the varying policies and the ability to manage or avoid most weigh stations can save truckers thousands of dollars in ticket fines. For further information, contact Michael Farrell at 646.257.2052 or view complete Truck Weigh Stations, Scales and State DOT Information at CoopsAreOpen.com.

Article source: Expert Articles

Most Recent Articles in Business category

  • Considerations When Renewing Your Business Electricity Contract - By: Ricardo Alan
    If you are ready to renew your business electricity contract, there are a few things you should consider, because there may have been important changes since you last signed an electricity contract.
  • Important Things You Should Know Before You Buy Business Gifts - By: Jnet Verra
    Giving business gifts has been a tradition. They are usually given to thank customers for the loyalty, strengthen the existing business relationships, to attract new leads, to motivate employees, and to celebrate the success of colleagues. If you are looking for the best business gifts, then choose something that will leave your recipients delighted.
  • Reception Furniture Says a lot about Who you are and What you Do - By: MJ Marks
    The reception furniture that you use in your reception area says a lot about what your business does and who you are. Discover a bit about three essential pieces of reception furniture and what it says about your business.
  • Funding A business- how to get a 'YES' - By: Sheila Elliott
    This is part one of my tips for funding a business successfully. A business can raise finance from personal savings, grant, loans or equity capital. All these finance options have their pros and cons which must be carefully assessed and evaluated to determine the best fit for a specific business type.
  • Free Timesheet - How Much Do Interruptions Cost You? - By: Philip Doherty
    Interruptions could be having a large impact on your company's bottom line, Iin terms of both time and cost.
  • Driving Without Insuring Is A Risk That Should Not Be Taken - By: Marcy Byrd
    A car is a mode of transportation that helps in commuting short as well as long distances. Nowadays, owning a car is a necessity for individuals and families, alike. However, there are certain criteria that have to be fulfilled if you want to own a car.
  • Leveraging Kanban For Metal Fabricators - By: Reto Hug
    Kanban was developed by Toyota and means "visual card" in Japanese. Kanban helps businesses employ just-in-time (JIT) production. It is employed as a signal that is emitted through the supply chain to tell employees when a supply is needed. For example, if a card is put at the bottom of a box of supplies with information about the supply on it, the staff member that uses up the last of that carton of supplies takes the card and sends it on to the supply manufacturing area so that more can be sent for. More are only ordered when the previous supply is used up.
  • Quality Management Through Process Control In Metal Fabrication - By: Reto Hug
    Perpetuating product quality is essential to any organization. Taking a broader stance, maintaining product quality can be achieved via controlling the quality of the methods that it takes to fabricate that product. An example of process control would be to take measurements of something when it is operating at its best so that the calculations can be compared to measurements in the future, to make sure that top quality functions are still in place. For example, strain on machine frames can be assessed via a strain monitor to assess quality. The machine's frame strain must have been measured when it was operating optimally and producing quality parts so that measurements from that assessment may be used as a control to assess against when the machine starts acting in a manner that is not best. This can help measure the entire production process. Monitoring processes for discrepancies is a revolutionary new method of looking at quality assurance rather than looking for flaws in parts. If a process makes quality parts and is able to be reiterated, this is a model scenario for a manufacturing setting.
  • How Plants Survive Winter - By: Saia Percy
    The survival of plants in cold weather is due to acclimation, which involves getting several weeks of exposure to near-freezing temperatures before a frost. Plants purposely put themselves in a state of desiccation. They remove excess water from their leaves-in the case of evergreens like rhododendrons and conifers-or from buds and stems. When they are in this self-induced dry state, protection from wind can be a plus.
  • Metal Fabrication and Lead Strategies - By: Reto Hug
    Manufacturing in a lean way is a way of removing waste in different forms, such as materials and time, to save on business costs. In the metal industry, lean manufacturing would focus on the processing being as efficient as possible and as little metal being wasted as possible. The main points of lean manufacturing insist that any waste manufactured should be minimized. Secondly, requirements in the market should be connected to manufacturing, and finally, there should be a value stream, where the whole process of the production of the product, with the suppliers and the consumer, should be one entity