Cisco CCNA / CCNP Exam Tutorial: Testing ISDN Links Without Pings

By: Chris Bryant
Submitted: 2007-01-17 15:44:35
Print this article | Tell a friend | For publisher | Social Bookmarking
Rating:
 

To earn your Cisco CCNA and CCNP certifications, you've got to master ISDN - and despite what some people say, there's still a lot of ISDN out there that needs to be supported. And when it comes to troubleshooting ISDN, there's a lot to look at. Is the correct ISDN switchtype configured? Are the dialer map statements correct? What about the dialer-group and dialer-list commands? And that's just the start.

I always say that all troubleshooting starts at Layer 1, the Physical layer of the OSI model. The usual method of troubleshooting ISDN is sending pings across the link, but the connection can be tested without using pings or even before assigning IP addresses to the BRI interfaces!

It's a good idea to place these test calls before configuring the interfaces - that way, you know you've got a valid connection before beginning the configuration (and there's a lot of config to go along with ISDN!)

To place a test call without using pings, use the isdn call interface command.

R1#isdn call interface bri0 8358662

R1#

03:54:43: BR0 DDR: Attempting to dial 8358662

03:54:43: %LINK-3-UPDOWN: Interface BRI0:1, changed state to up

03:54:44: BR0:1 DDR: dialer protocol up

03:54:45: %LINEPROTO-5-UPDOWN: Line protocol on Interface BRI0:1, changed state to up

03:54:49: %ISDN-6-CONNECT: Interface BRI0:1 is now connected to 8358662 R2

To tear the test call down correctly, use isdn disconnect interface. IOS Help displays the options with this command.

R1#isdn disconnect interface bri 0 ?

all Disconnect the data call(s) on all b channels

b1 Disconnect the data call on b1 channel

b2 Disconnect the data call on b2 channel

R1#isdn disconnect interface bri 0 all

03:58:36: BR0:1 DDR: disconnecting call

03:58:36: BR0:2 DDR: disconnecting call

03:58:36: %ISDN-6-DISCONNECT: Interface BRI0:1 disconnected from 8358662 R2, call lasted 20 seconds

03:58:36: %LINK-3-UPDOWN: Interface BRI0:1, changed state to down

03:58:36: BR0:1 DDR: disconnecting call

03:58:37: %LINEPROTO-5-UPDOWN: Line protocol on Interface BRI0:1, changed state to down

I say "correctly" because the one thing you don't want to do to end an ISDN call, test or otherwise, is just shut the interface. Telcos don't like it, and ISDN lab devices like it even less. Always let the d-channel do its work and tear the call down in an orderly fashion - don't just cut it off by shutting the interface down.

Chris Bryant, CCIE #12933, is the owner of The Bryant Advantage, home of free CCNA and CCNP tutorials, The Ultimate CCNA Study Package, and Ultimate CCNP Study Packages.

You can also join his RSS feed and visit his blog, which is updated several times daily with new Cisco certification articles, free tutorials, and daily CCNA / CCNP exam questions! Details are on the website.

For a FREE copy of his latest e-books, “How To Pass The CCNA” and “How To Pass The CCNP”, visit the website and download your free copies. You can also get FREE CCNA and CCNP exam questions every day! And coming in 2007 -- Microsoft Vista certification from The Bryant Advantage!

Article source: Expert Articles

Most Recent Articles in Certification Tests category

  • C Programming Career Courses - UK Explained - By: Jason Kendall
    When choosing any computer training program it is vital that the qualification it leads to falls in line with commercial requirements. In addition, ensure that your training suits you, your personality and abilities. Whether you're hoping to be a whiz with office user skills, or would like to achieve professional qualifications in IT, there are easy to follow courses and support to give you the chance you've been looking for.
  • Networking Training Providers - News - By: Jason Kendall
    These days, many workplaces could not function efficiently if it weren't for support workers fixing PC's and networks, while giving advice to users each and every day. Our country's need for larger numbers of skilled and qualified individuals is growing, as we turn out to be consistently more dependent upon computers in today's environment.
  • Computer Support Training - Options - By: Jason Kendall
    A very small number of men and women in this country are claiming to be happy in their job. The vast majority of course won't do a thing. The fact that you've got this far if nothing else suggests that you know it's time to make a change.
  • Choosing an MCSA in the UK Examined - By: Jason Kendall
    Whether you're just about to get started, or a professional ready to gain acknowledged certifications, there are interactive MCSA (Microsoft Certified Systems Administrator) study programs that teach both entry levels. For a newcomer to the world of computers, it's likely to be vital to have some coaching prior to getting into your four Microsoft Certified Professional exams (MCP's) that are required to pass the MCSA. Find a training provider that can tailor your studying to fit your requirements - one who will guide you to guarantee that you make the right choices.
  • Computer Training in Cisco CCNA Clarified - By: Jason Kendall
    Training in Cisco is fundamentally for those who wish to understand and work with routers and network switches. Routers join up computer networks over the internet or lines dedicated for that purpose. We'd recommend that your first course should be your CCNA. It's not advisable to launch directly into a CCNP as it is very advanced - and you need to work up to it before you take this on.
  • Microsoft SQL Computer Training In The UK Explained - By: Jason Kendall
    Everybody is busy these days, and most often should we have cause to advance our future prospects, getting educated outside of working hours is our best way forward. Certified training from Microsoft can fill that gap. You might like to find a training advisor, who could offer counsel on which job role would suit you, and what sort of duties are suitable for somebody with your abilities and personal preferences. Be sure your course is matched to your ability level and skills. A quality company will always guarantee that the training is purpose built for the career you want to get into.
  • Thinking About Web Design Courses Uncovered - By: Jason Kendall
    If you're considering a web design career, then you need training in Adobe Dreamweaver. We also advise that students get an in-depth understanding of the entire Adobe Web Creative Suite, which incorporates Flash and Action Script, to be able to facilitate Dreamweaver professionally as a web designer. Having such skills can lead to becoming an ACP (Adobe Certified Professional) or an ACE (Adobe Certified Expert).
  • Home Based CompTIA A Plus Training - Insights - By: Jason Kendall
    CompTIA A + has a total of four exams and study sections, but you only need to get your exams in 2 of them to qualify for your A+. For this reason, a great number of colleges simply offer two. Yet learning about all 4 will help you to build a far greater perspective of it all, something you'll discover is a Godsend in the commercial world.
  • MCSE Career Retraining - News - By: Jason Kendall
    Are you toying with the idea of doing an MCSE? Then it's likely that you'll fall into one of the following categories: You're currently an IT professional and you should formalise your skills with an MCSE. In contrast this could be your first step into the computer workplace, and your research tells you that there are many opportunities for qualified people.
  • Home Study Adobe Web Design Training Examined - By: Jason Kendall
    Should you be considering getting into the web design industry, studying Adobe Dreamweaver is a fundamental criteria to achieve professional credentials that are globally recognised. To utilise Dreamweaver commercially as a web designer, an in-depth and thorough understanding of the complete Adobe Web Creative Suite (which includes Flash and Action Script) is in our opinion essential.