Cable vs. DSL - Which is Better?

By: Sonu Kumar
Submitted: 2008-03-21 14:47:36
Print this article | Tell a friend | For publisher | Social Bookmarking
Rating:
 

As broadband Internet becomes more mainstream, one of the most common questions we get is: which is better, cable or dsl?
The answer to that question is not so definite. Many factors come into play when deciding which high-speed connection to choose. Regardless of which you choose (DSL, Cable, or even Satellite) it's going to be a ton better (and faster) than that ancient dialup modem you've been using. Not to mention, your Internet experience will be much more enjoyable.

DSL (Digital Subscriber Line)

Just like your existing dialup modem, DSL uses your existing copper wire phone line to deliver data at high speed. To qualify for DSL, you need the following:

- A phone line
- A DSL modem (which normally comes with the service)
- An Ethernet card or an available USB port (most DSL modems allow both connections, but Ethernet is recommended).
- A phone company (ISP) that is offering DSL service (e.g., Verizon)

One important factor that will influence your DSL connection is the distance between your home or office and the phone company's central office. The farther away you are from the central office, the signal becomes weaker, thus a slower connection. With that said, DSL is not as available widespread compared to cable. You'll need to contact your local phone provider to check availability.

Speed wise, depending on the package you choose, DSL can range from 128 kbps to 3 Mbps. Generally, the faster your connection the more expensive your service will be. You can expect to pay around $25-$30 a month for a 768 kbps connection, which is roughly 13 times faster than a 56k dialup modem.

::Pros::
- Relatively cheaper than cable
- Dedicated line, so speeds are almost guaranteed
- You can talk on the phone at the same time while surfing the net

::Cons::
- Slower speeds compared to cable
- Speeds drop the farther away your home/office is from the central office
- Not available in all areas

Cable Internet

Cable Internet gets our recommendation. Cable, which you can probably already tell, uses the coaxial cable that your television uses. To qualify for cable internet, you need the following:

- A cable modem (which normally comes with the service)
- An Ethernet card or an available USB port (most cable modems allow both connections, but Ethernet is recommended)
- A cable company offering cable Internet (e.g., Adelphia)

Unlike DSL, cable Internet does not depend on the distance between your home or office and the central office. However, unlike DSL, cable connections are typically shared among your neighbors. Although, most cable companies provide pipelines with huge bandwidth that this rarely becomes an issue.

Speed wise, cable Internet typically ranges from 3 Mbps to 10 Mbps, up to 3-4 times faster than DSL. However, expect to pay more for the service - $40-$50 per month.

::Pros::
- Faster speeds than DSL
- More widespread than DSL
- Distance does not affect speed

::Cons::
- More expensive than DSL
- Line is shared with other users

With all that said, you need to think about what type of user you are. If you are a heavy Internet user and downloader, you would highly benefit from a broadband connection. For the light users who use the Internet just to check emails, are probably better off with a dialup. However, if you are willing to splurge some cash on a broadband connection, then by all means, upgra

For more Free Resources www.100computertips.com

Article source: Expert Articles

Most Recent Articles in Wireless Networks category

  • Network Application Architectures - By: Imran Rashid
    Before diving into software coding, you should have a broad architectural plan for your application. Keep in mind that an application's architecture is distinctly different from the network architecture. From the application developer's perspective, the network architecture is fixed and provides a specific set of services to applications. The application architecture, on the other hand, is designed by the application developer and dictates how the application is structured over the various end systems
  • Networks Under Attack - By: Imran Rashid
    The field of network security is about how the bad guys can attack computer networks and about how we, soon-to-be experts in computer networking, can defend networks against those attacks, or better yet, design new architectures that are immune to such attacks in the first place.
  • Wireless Access - By: Imran Rashid
    Accompanying the current Internet revolution, the wireless revolution is also having a profound impact on the way people work and live. Today, more people in Europe have a mobile phone than a PC or a car. And the wireless trend is continuing with many analysts predicting that wireless (and often mobile) handheld devices -- such as mobile phones and PDAs-will overtake wired computers as the dominant Internet access devices throughout the world. Today, there are two common types of wireless Internet access.
  • Messages, Segments, Datagram's, and Frames - By: Imran Rashid
    The physical path that data takes down a sending end system's protocol stack, up and down the protocol stacks of an intervening link-layer switch and router, and then up the protocol stack at the receiving end system. As we discuss later in this book, routers and link-layer switches are both packet switches.
  • History of Computer Networking and the Internet - By: Imran Rashid
    You should know enough now to impress your family and friends! However, if you really want to be a big hit at the next cocktail party, you should sprinkle your discourse with tidbits about the fascinating history of the Internet.
  • Network Application Architectures - By: Imran Rashid
    Before diving into software coding, you should have a broad architectural plan for your application. Keep in mind that an application's architecture is distinctly different from the network architecture.
  • ISPs and Internet Backbones - By: Imran Rashid
    We saw earlier that end systems (user PCs, PDA's, Web servers, mail servers, and so on) connect into the Internet via an access network. Recall that the access network may be a wired or wireless local area network (for example, in a company, school, or library), a residential cable modem or DSL network, or a residential ISP (for example. AOL or MSN) that is reached via dial-up modem. But connecting end users and content providers into access networks -is only a small piece of solving the puzzle of connecting the hundreds of millions of end-systems and hundred of thousands of networks that make up the Internet.
  • File Transfer Protocol: FTP - By: Imran Rashid
    We have just learned that network processes communicate with each other by sending messages into sockets. But how are these messages structured? What are the meanings of the various fields in the messages.
  • How Do Packets Make Their Way Through Packet-Switched Networks? - By: Imran Rashid
    Earlier we said that a muter takes a packet arriving on one of its attached communication links and forwards that packet on to another of its attached communication links. But how does the router determine the link onto which it should forward the packet? This is actually done in different ways by different types of computer networks we will describe one popular approach, namely. The approach employed by the Internet. In the Internet, each packet traversing the network contains the address of the packet's destination in its header.
  • Upgrading your Network Hardware Infrastructure - By: Darwin Redshield
    Just like you want to learn about a date's likes and dislikes to see if there is potential for long term compatibility, you also need to carefully plan the integration of new and updated network hardware into your older structures.