VCRs with Video Converters

By: John Dulaney
Submitted: 2007-01-17 16:23:19
Print this article | Tell a friend | For publisher |

Rating:

 

The solution

For quite some times the inventors on the line were pondering how to overcome this problem of conflict of standards of video tapes. Video tapes from one zone did not play in other using a different standard. Ultimately they came up with the idea of Video converting VCR as the solution to the problem. A video converting VCR could play any tape using any standard and thus it was possible to view a PAL standard tape on an NTSC TV or vice versa.

Multi-system VCR and Converting Multi-system VCR

A Converting Multi-system VCR is an improved version of the traditional Multi-system VCR. An ordinary multi-system VCR can play video tapes from anywhere in the world. But there is one big constraint. The video tape played on it must conform to the standard the VCR uses. This is the point where a converting multi-system VCR scores over the conventional VCR in a way that it does not require the video tapes to be played which conform to its standards. It just converts in the incoming incompatible signals to friendly signals and makes the viewing of the tape possible. The same result can be obtained by using an external converter or such other device attached to a traditional multi-system VCR, but the quality will be poorer compared to a convertible multi-system VCR.

How to make the choice of brands

Experience reveals that branded products normally works well compared to those cheaper editions of the video converting VCR available in the market. Not only that the reliability is far better than the other ones. A number of branded products are however, available in the market. They include companies like the Samsung, Panasonic, Sony, Toshiba, Sharp, and Hitachi etc. All of them manufacture regular multi- system VCR but not the video converting VCR. The only company that produced video converting VCR was Samsung, the SV-5000W, but they have discontinued the productions. A potential customer often makes the choice basing on the clarity of picture, quality of audio systems and the life span of the products. So today for video converting VCR, you will require a converter. Some standard converters are the TENLABs or a PAL-SECAM-NTSC compatible television set.

Why the video tapes require a video converting VCR to play

The three most widely followed standards of video tapes are NTSC, PAL and SECAM. All variations of these standards followed anywhere in the world is a combination of two or all of these standards. When the first colour TV was discovered, the NTSC system was introduced in United States and Canada way back in the year 1953. Among the eastern countries, Japan with the obvious influence of United States and its nearness to North America also uses the NTSC standard that uses 525 lines frame to play the video tapes. PAL, the short form for Phase Alternating Line, was introduced in the European Countries in 1960 and immediately gained popularity. The bandwidth of PAL and SECAM standard, that is used in France, are the same and their line frames match too. But SECAM standard transmits colour signals sequentially. NTSC standard is not popular outside the North American countries and SECAM is used only in France and its earlier colonies. Rest of the world uses PAL and even the South American countries use some variations of it.

Issues relating to choice of video converting VCR

Compatibility is the main issue involved in the choice of a video converting VCR. Viewers in North America will opt for a video converting VCR that will enable them to play video tapes with PAL or SECAM standards to be watched on their NTSC TV. Similarly and European or Asian viewer will like to play NTSC video tapes on their PAL compatible TV and these can be achieved with video converting VCRs. In case of the multi-system VCRs, the companies will require the buyer to purchase some PAL/NTSC video converter that would replace a multi-system TV, which becomes otherwise a necessity. There are also systems with the feature of a direct converter that converters all incompatible signals into device friendly signals making viewing possible.

About DVD and video converting VCR

Video tapes are quickly loosing grounds in favour of the new and much more compact DVDs. In fact, DVDs have become the new version for home entertainment. But the problems of incompatibility of standards are also present here and thus some video conversion is also required here. In this case the video converting DVD player is region-free. Sometimes a region-free DVD player is also named as a code-free DVD player, that can play DVDs using any standard from any zone. Incidentally, the standard for a DVD is the same as that of a video tape, namely, the PAL, SECAM, and NTSC. Like Video converting VCR and multi-system VCR, there are several types, models and brands of a code-free DVD player. However, the leading companies are the same as in case of multi-system VCRs like Samsung, Sony, Panasonic, Sharp, Hitachi, Toshiba, and Phillips etc. The code-free DVD players can play any CD or DVD using any standard procured from any zone on a non-convertible device. With a region free or code-free DVD player you can play a SECAM DVD from France or a PAL DVD from Europe on your NTSC TV. However while buying you have to choose between multifarious models with different price tags depending on your requirement and budget. The prices will also be different basing on the brands and specifications.

About the prices for video converting VCR

Now that a direct video converting VCR is out of market, the possible alternative will be a separate video converter converting your multi-system VCR into a video converting VCR. The cost of branded products is on the higher side. For example if you opt for a product from companies like Hitachi, Panasonic, Sony, Toshiba, Sharp, or Phillips, it may cost you on average $350 that would be higher than the non-branded cheaper qualities available. But the warranty and service provided in case of branded items, compensates in the long run. However, fierce competitions in the commercial world have forced companies to come up with cheaper versions, around $100 per item and in multiples of that amount. For example, Samsung provides a Hi-Fi multi-system, with tape conversion facilities and a world-based TV tuner at approximately $400. However branded models ordinarily will cost in the range of $500 to $1,200 depending on product in respect of multi-system VCR converters and also SVHS playback systems.

The affect of visuals

It is a well established fact that a visual is worth hundreds of words. It is quite easy to apprehend the message with a visual rather than words or any other type of interaction. Even the cavemen used to express their messages by means of pictures drawn on the walls of caves, where a single picture could depict a thousand messages. That is why visual expression is always popular. In earlier days it was movies and then gradually with the coming up of home theater and televisions, video took over. But initially, with the difference of standards such videos were confined to a particular zone. To solve this shortfall, the video converting VCR and later with the advent of DVD the region-free DVD player came into existence. Now the restrictions of standards and difference of geographical zones are no more a hindrance to free viewing of video tapes, CDs and DVDs by the viewers with video converting VCR systems and region-free DVD players available.

Article source: Expert Articles