Reviewing the Akiles OffiWire Wire-O Binding Machine

By: Jeff McRitchie
Submitted: 2009-11-06 15:14:18
Print this article | Tell a friend | For publisher | Social Bookmarking
Rating:
 

Presented as a small or home office solution for light duty binding, the Akiles OffiWire comes in 3:1 or 2:1 pitch versions. It can bind documents using double loop, wire-o, or twin loop styles. Here is a short report that lists some of the strengths and weaknesses of this machine as we see them.

Strengths:

  1. Available in two different models, one that punches a three to one pitch, and one two to one version, the OffiWire give you some great options right off the bat. The 3:1 pitch machine gives you the option of binding books and booklets from three sixteenths to nine sixteenths of an inch with wire. You can also use GBC Proclick or 3:1 spiral coil binding supplies with that machine. The 2:1 version gives you options ranging from five eights to an inch and a quarter thick. However, you also have the option of binding smaller sized documents using special smaller sized wires if you ever find the need to produce a run of like sized documents.
  2. We really appreciated that Akiles went the extra mile by constructing the OffiWire's wire closer of all metal. It is often a problem with a lot of lower end machines that they scrimp a little on the quality of the closer. This creates problems down the line when they start to close wires crookedly. This machine's wire closer is made out of heavy duty steel and we can safely say that it is unlikely that it will ever wear out. The bolts that it uses allow for precision adjustment of the closer, and also prevent slipping.
  3. It's the little things that mean a lot. In the case of the OffiWire, that includes the U-shaped operating handle that seems more ergonomic than those on a lot of other machines. Our resident southpaw appreciated the fact that it was just as easy for her to use as it is for the righties.
  4. There is even a wire holder located on the machine's front that will help the user hold the spine of the document in place when hanging pages. All you need to do is to press on the back of the holder and insert the wire. The clamp then holds the spine in place while you do your inserting.

Weaknesses:

  1. Though it is a very feature-rich machine, it is important to understand that the OffiWire is a unit that is meant for use on a small office setting. It has a fairly light punching capacity of ten sheets per lift, and this alone makes it not terribly well suited for larger office or higher volume use. If you will realistically need a larger capacity than this, you should keep looking. If not, however, the OffiWire is still a great choice, in our opinion.
  2. Although the construction is good, it should be mentioned that the chassis of this machine is made of plastic. If you want a machine that is of all metal construction, you may need to step up to the WireMac, Akiles' similar, but more durable machine.
  3. There are no disengageable dies on the OffiWire, and it is limited to punching sheets that are letter sized. There is also no mechanism for controlling the depth of the punch margin.

If you are interested in more information about the Akiles OffiWire Binding Machine you should really check out MyBinding.com. They offer a great price on this machine and they even offer Free Shipping on all orders over $75. Plus, they carry one of the largest selections of Wire Binding Supplies and binding covers available on the internet. Check them out today!

Article source: Expert Articles

Most Recent Articles in Product Reviews category

  • Martin Yale 400 Paper Jogging Machine Review - By: Jeff McRitchie
    Any business that produces and binds a lot of documents on a regular basis should have a paper jogging machine on hand. Paper joggers help remove static from sheets and square up all of the document's pages before punching, binding, cutting, or folding. Here we will take a look at one of the entry-level players on the paper jogging machine market, the Martin Yale 400, and give you our assessment of this machine's strengths and weaknesses.
  • Rhino Tuff CI 3000 Coil Inserter Review - By: Jeff McRitchie
    Rhino's CI 3000 features a unique design that purports to make it easier to do spiral coil book binding. It is especially designed to excel with larger documents that use thirty six inch coil. We investigated this machine, and here are some of its strengths and weaknesses as we see them.
  • Lamitek Photosmart 13 Laminator Review - By: Jeff McRitchie
    The emergence and increasing numbers if digital printers has sparked an interest in laminating machines that can work with high-quality photos and/or glossier printed pages. The Lamitek Photosmart 13 is a laminating machine that is designed to meet this demand. In the following review, we delve into this machine, and give you a list of what we consider to be some if its strengths and weaknesses.
  • PC200E Spiral Coil Binding Machine Review - By: Jeff McRitchie
    As the least expensive spiral coil binding machine that offers disengageable dies and an electric coil inserter, the PC200E is well positioned in the marketplace. Presented as a binding solution for small or home offices, this machine has some strong features and a couple of weaknesses worth mentioning. Here is our opinion of the PC200E spiral coil binding system.
  • Martin Yale 1217A Autofolder Review - By: Jeff McRitchie
    For years the standard in paper folding machines, the Martin Yale Intimus 1217A is well-known in the small print industry for being a solid and flexible machine. Here we will take a look at some of its features, strengths and weaknesses to help you decide if it is the right folding machine for your needs.
  • Lamitek PhotoPro 13 Laminator Review - By: Jeff McRitchie
    There are many laminators available and sometimes it is hard to know which one you should buy. It is always a good idea to get a versatile machine, such as one that can do both hot and cold lamination, while also providing a crystal-clear finish. One such machine is the Lamitek PhotoPro 13 laminator (formerly called the Lamitek PhotoSmart 13). This is an economically priced laminator that would be good for laminating photographs, school projects, signs, and more. This review will talk about some of the PhotoPro 13's features so you can make an informed decision when buying your new laminator.
  • Martin Yale 700E Paper Cutter Review - By: Jeff McRitchie
    A commercial-quality paper cutter, the Martin Yale 700E is meant to be used in smaller print shops or in-house production floors for medium to large businesses. Here we take a look at the 700E's features, and give you our assessment of its strengths and weaknesses.
  • PC200 Spiral Coil Binding Machine Review - By: Jeff McRitchie
    The PC200 is positioned as a low-cost spiral coil binding solution for low volume users. Here we take a look at this machine and examine its strengths and weaknesses.
  • Intimus SmartFold 2051 Paper Folding Machine Review - By: Jeff McRitchie
    Intimus has a terrific selection of paper folding machines and one of their standout products is the SmartFold 2051. This is a machine that's super easy to operate and it can produce several different fold patterns. It'd be a good selection for any office, school, or other organization that needs a versatile, high-performance paper folding machine. Keep reading to find out more about this great paper folder.
  • Intimus Pro 32CC Cross-Cut Shredder Review - By: Jeff McRitchie
    The all new Intimus Pro 32CC paper shredder is a welcome addition to Intimus' already impressive shredder lineup. Intimus is currently one of the top shredder manufacturers and because of products like the 32CC, it's easy to see why. This review will look at the strengths of this machine (as well as its weaknesses), so you can find out whether the 32CC is a good choice for your shredding needs.