Basic Features Of Bicycle Wheels

By: Andrew Caxton
Submitted: 2007-01-17 16:26:25
Print this article | Tell a friend | For publisher | Social Bookmarking
Rating:
 

There is no better way to spend a weekend than to go on a leisurely ride on a bicycle on a quiet track in the woods. Bicycles have an old world charm about them and even in this fast-paced world has its own prominent place. Of all the parts of the bicycle, it is the bicycle wheels which are the most important ones. Bicycle wheels are the ones which carry the entire burden on them and thus need to be very carefully observed.

Types of Tires

Almost 99% of the bicycles have the clincher kind of tires. The clincher tires consist of an outer tire with a cross section which has a typical U – shape while there is another inner tube within the tire. Apart from these parts there are three key parts which create the tire. The first part is the Bead which is basically the rim of the tire. Normally, the beads contain hoops which are made up of steel wires which are very strong. The second very important part is the fabric. Tire manufacturers weave this cloth fabric between two beads to make the basic framework of the tire. The third major portion is the rubber. Rubber is used as an outer layer to the fabric. Rubber is used only after the basic framework is complete.

Apart from the clinchers, the bicycles also have wheels which are known as tubular tires. Unlike the clinchers, the tubular tires do not have any beads. In the tubular tires, the two rims of the tires are actually stitched together around the inner tube.

Other Tire Aspects

Bicycle tires have a part called traction. This traction is basically the resistance capacity of the tires which avoid skidding or slipping. Another very important aspect of bicycle wheels is the width and pressure of the bicycle wheels. The width and pressure of the wheels are inversely proportional. This implies that if the width of the wheel is greater then it has a low pressure and if the width is not very wide then it has a high pressure. Also generally, the wheels are made up of two basic types of rubber, namely natural latex rubber and butyl.

There are several other points apart form the features mentioned above. However, these are the most important features which make up the basic framework of the wheels of the bicycle and without which the wheels cannot work.

Andrew Caxton is a reliable journalist who has published more articles on this issue for http://www.bikecyclingreviews.com. He provides tips and advice about bike rims as well as on how to align bicycle wheels.

Article source: Expert Articles

Most Recent Articles in Cycling category

  • Family Cycling Holidays in France - By: Martyn Davis
    Whether you are looking for a guided leisure cycling holiday in France or a sport cycling holiday, these can all be catered for in the incredibly beautiful countryside around France.
  • Mountain Biking Essentials - By: Jennifer Bynum
    As the old adage goes, “An ounce of prevention is worth a pound of cure.” And if you’re going on a lengthy bike ride, that makes a lot of sense. To keep yourself comfortable and safe – and avoid getting caught in any frustrating situations – it’s important to be prepared before you set out.
  • Major Advantages Of Road Bikes - By: Andrew Caxton
    The oldest and most popular form of bikes is the Road Bike. These have been an eye-catcher for people since decades and one can easily find several deals on the internet to buy Vintage Road Bikes. These bikes are popular as they are light weight and have been designed specifically to ride on smooth roads.
  • Basic Features Of Bicycle Wheels - By: Andrew Caxton
    There is no better way to spend a weekend than to go on a leisurely ride on a bicycle on a quiet track in the woods. Bicycles have an old world charm about them and even in this fast-paced world has its own prominent place. Of all the parts of the bicycle, it is the bicycle wheels which are the most important ones.
  • The Necessities Of The Lowrider Bikes - By: Andrew Caxton
    The low rider bike provides an enhanced low profile. The ride along a country side is well suited on your low rider bike only. The experience of a low and slow bike riding could be witnessed in here.
  • Cross Country Touring - By: Alex Landels
    A bike is a wonderfully elegant creation-true technological genius.A well-made bike can take you thousands of trouble-free miles. When it does break down, even the most mechanically challenged can repair it.
  • Competition Bikes Are Designed For Aerodynamic Competence - By: Tim Gorman
    If you are a bicycle enthusiast and you like to watch or participate in bike racing then this article is for you! Here are various biking tidbits along with some basic information and specifications that you might need.Racing Bike ConstructionA competition bicycle is constructed with light aluminum and dual carbon fiber chain and seat stays.
  • Saddle Posture And Selection Are Very Important For Cycling - By: George Wood
    Saddle posture and selection are two important riding needs. The chances of minimized saddle sores and reduced crotch pressure can be obtained by choosing the right saddle and the right posture. Saddle selection depends on your riding technique, but still, there is no saddle posture that fits all.
  • Things To Remember While Buying a Bicycle Wheel - By: Andrew Caxton
    Most Important Part Of a Bicycle The first thing that comes to mind on thinking about bicycles is the wheel. Bicycles are actually the simplest vehicle to run on a pair of wheels. To think about it.
  • If You Are Serious About Cycling You Need The Proper Shoes - By: Gregg Hall
    When you start running, you get running shoes, right? And when you play basketball you wear basketball shoes. Golfers wear golf shoes, and tennis players wear tennis shoes.