Technical Specifications of Mountain Bikes

By: Andrew Caxton
Submitted: 2007-01-17 16:26:24
Print this article | Tell a friend | For publisher | Social Bookmarking
Rating:
 

The most commonly used Mountain Bikes are:

Downhill Bikes:Most prominently used for competition in which one goes down the hill. So with that speed, bikes need to be with tough frames and with heavy-duty brakes such as disc or hydraulic brakes.

XC Bikes: This is another kind of bike which is highly used for competition in which one can go both down and climb hills. So its frame should be light but reasonably tough. Brakes used in this particular bike are v-brakes and light disc brakes.

Hybrid Bikes: This category of bikes is a good option for those who want to ride on both mountains and road.

These bikes either run on front suspension or on full suspension (which is a combination of both front and back suspensions). Various kinds of brakes employed in these bikes are:-

Rim Brakes: They are both light and powerful but their power decreases in muddy terrain where they become slippery.

Disc Brakes: They are light and powerful and are not affected by weather.

Hydraulic Brakes: They are very powerful and don’t need much maintenance, but are expensive than other brakes.

Frame Materials: The bikes can be made of aluminum, steel or titanium. These are very important elements of the bike as their composition determines the weight, strength, responsiveness and life of the bike.

Size: Like conventional bikes, mountain bikes come in small, medium and large sizes. But different manufactures use different reference point of measurement therefore sizing is not always consistent.

Latest Trends:

All Mountain Bikes: The “All Mountain Bikes” are characterized by 5-6 inch (125-150 mm) rims to take on very rough conditions.

29er Bike: This uses 700cc-sized rims and is suited for tires of 2 inches (50mm) width or more, so that it is able to roll over the obstacles.

Singlespeed: This is a blend of simplicity with innovation in suspension design.

Some of the other trends includeStable Platform Value Suspension Technology. Here the compressor shim stack has been replaced with a pair of overlapping cups. It also employs VPP suspension designs to balance different forces thereby eliminating unwanted compression without limiting bump absorption.

Andrew Caxton is the author and editor of many resources published at http://www.bikecyclingreviews.com . For additional information regarding MTB, including suspension forks and disc brakes go to mountain bikes

Article source: Expert Articles

Most Recent Articles in Cycling category

  • Family Cycling Holidays in France - By: Martyn Davis
    Whether you are looking for a guided leisure cycling holiday in France or a sport cycling holiday, these can all be catered for in the incredibly beautiful countryside around France.
  • Mountain Biking Essentials - By: Jennifer Bynum
    As the old adage goes, “An ounce of prevention is worth a pound of cure.” And if you’re going on a lengthy bike ride, that makes a lot of sense. To keep yourself comfortable and safe – and avoid getting caught in any frustrating situations – it’s important to be prepared before you set out.
  • Major Advantages Of Road Bikes - By: Andrew Caxton
    The oldest and most popular form of bikes is the Road Bike. These have been an eye-catcher for people since decades and one can easily find several deals on the internet to buy Vintage Road Bikes. These bikes are popular as they are light weight and have been designed specifically to ride on smooth roads.
  • Basic Features Of Bicycle Wheels - By: Andrew Caxton
    There is no better way to spend a weekend than to go on a leisurely ride on a bicycle on a quiet track in the woods. Bicycles have an old world charm about them and even in this fast-paced world has its own prominent place. Of all the parts of the bicycle, it is the bicycle wheels which are the most important ones.
  • The Necessities Of The Lowrider Bikes - By: Andrew Caxton
    The low rider bike provides an enhanced low profile. The ride along a country side is well suited on your low rider bike only. The experience of a low and slow bike riding could be witnessed in here.
  • Cross Country Touring - By: Alex Landels
    A bike is a wonderfully elegant creation-true technological genius.A well-made bike can take you thousands of trouble-free miles. When it does break down, even the most mechanically challenged can repair it.
  • Competition Bikes Are Designed For Aerodynamic Competence - By: Tim Gorman
    If you are a bicycle enthusiast and you like to watch or participate in bike racing then this article is for you! Here are various biking tidbits along with some basic information and specifications that you might need.Racing Bike ConstructionA competition bicycle is constructed with light aluminum and dual carbon fiber chain and seat stays.
  • Saddle Posture And Selection Are Very Important For Cycling - By: George Wood
    Saddle posture and selection are two important riding needs. The chances of minimized saddle sores and reduced crotch pressure can be obtained by choosing the right saddle and the right posture. Saddle selection depends on your riding technique, but still, there is no saddle posture that fits all.
  • Things To Remember While Buying a Bicycle Wheel - By: Andrew Caxton
    Most Important Part Of a Bicycle The first thing that comes to mind on thinking about bicycles is the wheel. Bicycles are actually the simplest vehicle to run on a pair of wheels. To think about it.
  • If You Are Serious About Cycling You Need The Proper Shoes - By: Gregg Hall
    When you start running, you get running shoes, right? And when you play basketball you wear basketball shoes. Golfers wear golf shoes, and tennis players wear tennis shoes.