Fly Fishing Lines - Leaders and Tippets

By: Michael Russell
Submitted: 2007-01-17 16:25:39
Print this article | Tell a friend | For publisher | Social Bookmarking
Rating:
 

The leader consists of a monofilament line which has a heavier butt end to attach to the line and a thinner, tapered end, referred to as the tip or tippet, which attaches to the fly. This leader is meant to serve as an invisible link between the fly and the line and is less likely to deter the fish than the line attached to the fly by itself. It also accentuates the soft landing of the fly on the water.

A good leader must be thicker where it joins the line and with a degree of stiffness. A limp or soft leader will not lay out straight and hence impedes a nice presentation of the fly. The diameter of the thin end, or tippet, is varied and is chosen according to the conditions.

The strength of the outfit is completely reliant on the breaking strain of the tippet, being the thinnest part of your rig. The size is usually indicated by a number and the letter X. Tippet size also influences the delivery of the fly and a good balance is required between the weight of the fly and the diameter and weight of the tippet.

Two types of leader are available, being the knotted and the knotless. The knotless is a single piece of monofilament tapered during manufacture, the knotted type is constructed using various pieces of monofilament knotted together, the latter being the most popular due to its delivery capabilities. The leaders are usually manufactured in 2.3m and 2.7m lengths.

Although the previously mentioned number and X method of identifying leaders is used, the more common method of ordering leaders is to quote the length and breaking strain. Length is important as a leader which is too short will not present properly and will make the fish suspicious. The butt of the leader should be easy to attach to the fly line and usually consists of a loop. At the end of the day's fishing the leader will more than likely be much shorter than at the start. The making of leaders from monofilament is a skill and there are as many different styles as there are fishermen, being made for the conditions encountered and to suit the other equipment of each angler.

The abovementioned are those that are commercially available. To construct your own is a very valuable learning experience, to construct it and then go out and use it and see if it works as it should. There are a few guidelines which should be followed: Always use the same brand of leader material. Always follow a published design if you do not have a pattern of your own. Make various types of leader for various conditions. One type is not suitable for all conditions. Be certain that all knots are firm and secure, test each one by tugging. Always ensure that any knot or line twist is untangled immediately.

As the butt section is about two thirds the thickness of the line it is attached to, a different leader is required for each line size. It is therefore necessary that the intermediate sections of the leader should vary in size. If the tapering of the leader is too great, there is every likelihood of the leader parting under the strain of a hooked fish.

Michael Russell

Your Independent guide to Fishing

Article source: Expert Articles

Most Recent Articles in Fishing category

  • Try Fly Fishing, Make It A Vacation - By: Dale Montz
    It can be considered part science and part art. Fly-fishing is more than just fishing, for some, it's a Zen moment, maybe even a spiritual experience.
  • How you make your fishing experience a great one? - By: Kulvir Chouhan
    For a truly rewarding experience, try fly fishing. You can step into another world when you are fly fishing. Actually, you don't need to leave the planet or have an out-of-body experience; but, when you are fly fishing, sometimes you get such a feeling.
  • Going Carp Fishing in France - By: Martyn Davis
    When you start thinking of going carp fishing in France, it is so easy to get lost as to what lake or river to fish, but at the same time you will have plenty to choose from, so finding the right place may just be around the corner!!
  • Lure Spread in Fiji: For Blue Marlin - By: Adrian Watt
    OK, so we know that if you tow just about anything around behind a game fishing boat in the South Pacific, eventually, a blue marlin is going to take a look and have a go.
  • Going on a Gamefishing Charter Boat: Some tips - By: Adrian Watt
    Know Before You Go: First, do your research. What you want to catch dictates were you want to go and fish. Once you decide where you want to go, find out what charter boats are in the area.
  • Fighting Saltwater Game Fish: A Beginners Guide - By: Adrian Watt
    The following guidance assumes you are fairly new to big game saltwater fishing and are out fishing on a charter boat. This type of information is given to all guests aboard our game boats if they are not experienced anglers. Occasionally we have to remind experienced anglers as well !
  • Aquarium Tank Basics - By: Gaurav Walia
    Any new aquarium tank should first be given a thorough test to ensure that it is watertight. If after 12 hours there are no leaks, it may be emptied and placed in its final position.
  • Family Fishing Holidays In France - By: Martyn Davis
    With France being such a vast country with a large coast line and many rivers, lakes, streams and canals, there are many different types of fishing holidays in France that you can choose from.
  • Florida Fishing Charters - By: Benicio Brown
    If you plan to go fishing in the Florida Keys area, the best option is to book a fishing charter. Forget about the complications and leave the job to an experienced captain and his crew.
  • Getting Ready For Ice! - By: Mike Robertson
    Anyone for some ice? No not in your drink, fishing that is! I have put away the fly vest and my favorite summer shorts for another year. This is a time where I almost shed a tear or two because I know open water fishing has ended here in Alberta.