Using Fresh Air as a Construction Material

By: David Kelsall
Submitted: 2007-01-17 16:26:57
Print this article | Tell a friend | For publisher | Social Bookmarking
Rating:
 

Is it possible to create a building with walls and a roof made from 99.5% fresh air? Would it then be possible for this building to withstand anything the weather could throw at it – from gale force winds to heavy snow fall? The surprising answer to these questions is yes! Not only is it possible but it is already being done in many countries around the world. The buildings in question are in fact inflatable buildings.

It’s important at this point to make a distinction between air-supported buildings and inflatable buildings. A traditional air-supported building is one which is comprised of a single layer membrane attached to the ground around its perimeter. Air is blown under the membrane to lift it off the ground and form the shape of the building. An inflatable building on the other hand, uses two layers of membrane connected together typically using spars made from the same material. The cavity formed between the layers is pressurised with air producing a rigid structural element which allows large span structures to be achieved. The key difference between the two styles of building is that air-supported buildings require airlocks at all the access points to prevent air being lost when doors are opened since the entire occupied space of the building is pressurised.

An inflatable building only requires pressurised air within the cavities of the walls and so does not require airlocks since the occupied interior of the building is at normal atmospheric pressure. Since a much lower volume of air is pressurised, inflatable buildings require a lot less power for continuous operation.

The air contained within the walls of an inflatable building become a true structural part of the building. The membranes used in the construction of such buildings are typically less than 1mm thick and so the amount of membrane used compared to the volume of air contained within the walls is incredibly low (typically less than 0.5%).

A major benefit of this style of construction is that air is available just about everywhere on the planet. When a building needs to be moved, the air can simply be allowed to escape enabling an entire building to be packed in to a very small volume compared to its inflated size. The building can then be transported easily to its new location and inflated using the one building material which is readily available everywhere – air! Better still, this building material is absolutely free.

David Kelsall is the technical director of Tectoniks Limited in the UK. He has over 14 years experience in the design of pressurised structures including inflatable buildings, hot-air balloons, airships and pressure vessels. Examples of his work can be found at http://www.tectoniks.com/products.php

Article source: Expert Articles

Most Recent Articles in Science category

  • Hydrogen As a Fuel Source - By: Levi Quinn
    From water to air, there are a number of ways to energize your car. Alternatives to petroleum are a hot topic today. The growing concern for the environment is steadily increasing. It's an important issue that many people want to feel personally connected to. Hydrogen as a fuel source is not an entirely new idea. But science is taking a closer look at the impact that using hydrogen could have on both the environment and the economy. The best solutions are the ones that have more benefits than drawbacks.
  • MRI and Ultrasound: Two Vital Branches of Radiology - By: R Govindan
    Radiology was initially the branch of medical imaging that made use of x-rays on large flat sheets of photographic films for diagnosis. Modern day radiology is no longer confined to the practice of x-rays and now encompasses other methods of diagnostic imaging such as Computed Tomography (CT), Magnetic Resonance Imaging (MRI) and Ultrasound.
  • Processes Involved In Blavatsky's Writings and its effects - By: Edi Bilimoria
    Helena Petrovna Blavatsky (HPB) demonstrated the Siddhis (psychic-spiritual faculties) of clairvoyance, clairaudience, and the powers of projection, precipitation and being en rapport. These were all used in her writings on Occult science and Meta Physics which may be categorized into seven kinds of processes. We outline them below but it is emphasized that none of the above processes are miracles or supernatural
  • Biotech Development - By: Marcia Henin
    The development of Biotechnology and the affect it has in detecting Toxicity levels in the Human body.
  • Nanotechnology - Revolution in the Field of Medicine - By: Marcia Henin
    How science has learned to use Nanotechnology for bettering the process of Drug development.
  • Nanotechnology - Development in Water-Based Technology - By: Marcia Henin
    What is Nanotechnology and how does it applies in the science world - In this article, we will review some of the uses of Nanotechnology and its connection to the solubilization process.
  • The Z-Boson Mass and its Formula as Multiple Proofs in One Bowl of Yummy Pudding - By: Sean Sheeter
    A demonstration of the mathematical, theoretical and, especially, empirical connotations of the phrase "Pudding Proof" in the context of a highly exacting physical model. In particular, a formula is given deriving the mass of the Z-boson from two heavy quarks and and Higgs field. Remarkably, the precise correlation with the known value of the Z-mass is thus empirically proof positive of these far less directly measurable masses, which is further supported by arithmetic and theoretic construct.
  • The Theory, Significance and Precise Calculation of Gluino Mass - By: Sean Sheeter
    A preview of the most significant predictable particle cascades at Cern's LH-Collider in the coming years. Describes how a precise gluino mass of 6.388355 TeV relates to the super-symmetric Higgs mechanism and decays to squarks and other 'sparticles as a prerequisite to creation of 'dark mass,' as well as the unsolved puzzle of material baryon creation. Which also goes on to shows why giving three dimensionless calculations for the gluino mass are central to the e-course "241-Mumbers."
  • Derivation of the Pure Precise Fine-Structure Number and as a Ratio of Two Inexact Metric Constants - By: Sean Sheeter
    A history of a definitive answer to #1 'millennium question' of Strings 2000 in regard to whether all fundamental parameters can be determined in a dimensionless manner. Focus's on a 'pure' calculation of the fine-structure constant from a unified 'monolithic' system that allows precise equations for the full spectrum of fundamental particle masses from Higgs/SUSY to quarks, neutrinos and dark matter. With an update on controversies of determining the fine-structure from metric measures and a few other related issues.
  • Proof of the Exact Up and Down Quark Masses from the Pion Mass-Differential - By: Sean Sheeter
    A discussion of the equivalence of the mass differential between the charged and neutral pion as a function the mass difference between the down and up quark. Given the unprecedented mass value of the down quark = 7.763258 MeV, the up quark mass is calculable from the even more exacting d-u mass differential = 4.593453 MeV, where the experimental pion mass difference = 4.5936 plusmn.0005 MeV.